Original LIN wiper motor
With integrated control unit — control runs over the bus.
Art. No. 11 020 550 · T-Varia
T-Varia Wiper LIN Bus The modern wiper system on the network.
Wiper motor with LIN bus and rain/light sensor — integrated via the CAN bus instrument control panel.
Why this trainer
What it does in the classroom.
Four points where the T-Varia Wiper LIN Bus differs from a diagram — you measure on the trainer, not on the drawing.
Rain/light sensor
Original rain and light sensor with LIN bus.
Integrate into the network
The LIN components are integrated into the networked T-Varia system.
Code and test
Code control units, adapt software versions, test data lines.
In detail
View full size At a glance
What is inside.
This module panel adds the windscreen wiper system of a modern vehicle to your T-Varia system. Together with the control panel “Instruments CAN bus”, the unit is controlled and integrated into the network.
Features
- Wiring of all original automotive components according to the wiring diagram
- Networking the system by connecting the power supply and bus lines of the control units – all lines can be measured and separated for diagnosis
- Terminal designations to DIN 72552, with schematic print
- Wiper in original linkage, with 6 mm glass pane and rain sensor
- Use of standard workshop test equipment for diagnosis and troubleshooting
- 10 × 4 mm safety connections, 2 of them with bridge plugs, for wiring and measuring
- Integrating the LIN bus components into the networked system
- Didactically prepared documentation with tasks and worksheets plus the corresponding solutions
Learning content
- Reading and working with automotive wiring diagrams
- Data communication with LIN bus
- Identifying electrical and electronic components, assemblies and systems
- Testing and repairing electrical and electronic circuits
- Selecting and using electrical measuring and test equipment
- Measuring and assessing electrical quantities and signals
- Coding control units, adapting software versions and testing data communication lines in line with statutory and manufacturer regulations
- Documenting results and evaluating them against calculated values and manufacturer specifications
Equipment
- T-Varia system panel 956 mm × 250 mm × 6 mm, fits the T-Varia trolley
- Colour digital print behind 2 mm acrylic glass with circuit diagrams and symbols, two chrome-plated bow handles for easy handling and a rear cover
- 1 × original wiper motor with LIN bus control and integrated control unit
- 1 × original washer pump with front/rear polarity reversal
- 1 × original rain/light sensor LIN bus
- 1 × pane, 6 mm thick, like a car windscreen
- 1 × wiper arm with linkage and blade
- 1 × spray bottle for rain simulation
Technical data
Everything in detail.
Specifications
| Design | T-Varia module panel |
|---|---|
| Bus | LIN |
| Control | via T-Varia instruments CAN bus |
| EQR level | 3 |
| Manual | 42 pages · tasks · solutions |
| E-Learning | TPGO course available |
Technical data
| Dimensions (L × W × H) | 960 × 250 × 250 mm |
|---|---|
| Weight | 10.0 kg |
| Power supply | 13.8 V DC (40 A) |
| Conformity | CE · UKCA |
T-Varia Wiper LIN Bus in your workshop
We bring it to you.
A demonstration takes about two hours. We set it up, show the tasks on the trainer and the course that goes with it. You will see right away whether it fits your training workshop.