Original sensors
Coolant temperature, hot-film air mass meter, wideband lambda sensor, boost pressure and more.
Art. No. 11 041 050 · T-Varia
T-Varia Engine Management Sensors All engine management sensors.
Each sensor is connected to the circuit diagram and can be operated, adjusted and measured individually — suitable for MPI, FSI and TDI.
Why this trainer
What it does in the classroom.
Four points where the T-Varia Engine Management Sensors differs from a diagram — you measure on the trainer, not on the drawing.
Set the signals
Each sensor has a potentiometer for signal adjustment.
Measure individually
Each sensor can be operated, adjusted and measured separately.
One set for three engines
Contains all sensors to run an MPI, FSI or TDI engine.
In detail
View full size At a glance
What is inside.
With this topic panel you connect the engine management sensors to the engine control unit according to the circuit diagram. Each sensor can be operated, adjusted and measured individually – all sensors needed to run an MPI, FSI or TDI engine are included. Seven potentiometers and an integrated simulation function deliver the correct signals.
Features
- Wiring of all original automotive components according to the wiring diagram
- Each sensor can be operated, adjusted and measured individually
- Each sensor is adjustable and delivers correct signals
- All sensors for running an MPI, FSI or TDI engine are included
- Terminal designations with schematic print
- Use of standard workshop measuring instruments
- 23 × 4 mm safety connections, 1 of them with a bridge plug, for wiring and measuring
- Didactically prepared documentation with tasks and worksheets plus the corresponding solutions
Learning content
- Working with wiring diagrams
- Identifying electrical and electronic components, assemblies and systems
- Selecting and using electrical measuring and test equipment
- Measuring and assessing electrical quantities and signals
- Documenting results and evaluating them against calculated values and manufacturer specifications
Equipment
- T-Varia system panel 956 mm × 250 mm × 6 mm, fits the T-Varia trolley
- Colour digital print behind 2 mm acrylic glass with circuit diagrams and symbols, two chrome-plated bow handles for easy handling and a rear cover
- Original coolant temperature sensor
- Original intake air temperature sensor
- Original intake manifold pressure sensor
- Original wideband lambda sensor
- Original hot-film air mass meter
- Original boost pressure sensor
- Original fuel pressure sensor
- One potentiometer per sensor for signal adjustment
Technical data
Everything in detail.
Specifications
| Design | T-Varia topic panel |
|---|---|
| Connections | 23 × 4 mm safety sockets |
| Engines | MPI · FSI · TDI |
| EQR level | 2, 3 |
| E-Learning | TPGO course available |
Technical data
| Dimensions (L × W × H) | 960 × 250 × 250 mm |
|---|---|
| Weight | 6.5 kg |
| Power supply | 13.8 V DC (40 A) |
| Conformity | CE · UKCA |
T-Varia Engine Management Sensors in your workshop
We bring it to you.
A demonstration takes about two hours. We set it up, show the tasks on the trainer and the course that goes with it. You will see right away whether it fits your training workshop.