LIN bus controlled
The regulator is addressed via LIN — as in current vehicles.
Art. No. 11 035 140 · T-Varia
Alternator with LIN Bus Regulator The alternator on the network.
Original automotive alternator with LIN bus regulator on a slide — including battery management control unit.
6 Chapters · in the e-learning course
2 hrs Hands-on · total task time
6 Languages · same task, different language
Why this trainer
What it does in the classroom.
Four points where the Alternator with LIN Bus Regulator differs from a diagram — you measure on the trainer, not on the drawing.
Battery management included
Fixed positive and negative safety leads incl. battery management control unit.
Measure at the box
Breakout box with 10 connections, regulator contact DF can be interrupted.
Charge the battery
Learning content: battery charging with the alternator in a networked system.
In detail
View full size At a glance
What is inside.
Ready-to-use, fully functional automotive alternator with LIN bus regulator, mounted on a slide for the T-Varia alternator drive unit. The integrated measuring box contains 4 measuring and connection sockets (LIN, DF, L) plus the phases U, V, W brought out to 6 sockets.
Features
- Original automotive alternator prepared for training
- Mounted on a slide with quick-change mount and locking pin
- Quick-change coupling on the drive shaft
- 2 × large handles for easy handling
- Didactically prepared documentation with worksheets and the corresponding solutions
Learning content
- Function of the alternator, the regulator and the electrical circuit
- Operating situations with excitation, charging and consumer current
- Charging the battery with the alternator
- Loading the alternator, three-phase alternator test
- Identifying electrical and electronic components, assemblies and systems
- Measuring and assessing electrical quantities and signals
Equipment
- Alternator with LIN bus regulator for use with the “T-Varia alternator basic kit” 11035040 and the “T-Varia starter set CAN bus” 14020236
- Breakout box with 10 × 4 mm safety connections
- Interruption of the regulator contact DF
- Interruption of the internal diodes at U, V, W optionally allows external rectification with the “T-Varia Rectification” panel 11035060
- Permanently attached positive and negative safety leads incl. battery management control unit
Technical data
Everything in detail.
Specifications
| Design | Alternator on slide for the T-Varia drive unit |
|---|---|
| Breakout box | 10 × 4 mm safety sockets |
| Requirement | T-Varia starter set CAN bus 14020236 |
| EQR level | 2, 3 |
Technical data
| Weight | 8.0 kg |
|---|---|
| Power supply | 12 V vehicle battery |
E-Learning · TPGO
The course for the trainer.
On every screen.
The TP-Varia LIN Bus Generator comes with a complete course on TPGO. It runs in the browser — tablet, phone, computer. The tasks walk through the same measurements the apprentice takes on the trainer: first the assumption, then the series of readings, then the comparison.
- 6
- Tasks · with measurement series and evaluation
- 6
- Chapters · from the basics to diagnostics
- 2 hrs
- Hands-on · total task time
- 6
- Languages · same task, different language
Fundamentals 100 % · Advanced 0 % SOLO 3–3 · Apply Bloom · EQF 2–2
Certificate · Progress & XP
License for an unlimited number of students and teachers · Term: 10 years, renewable · Activation on your TPGO E-Learning domain.
Request now arrow_forward Alternator with LIN Bus Regulator in your workshop
We bring it to you.
A demonstration takes about two hours. We set it up, show the tasks on the trainer and the course that goes with it. You will see right away whether it fits your training workshop.